You are here: Caboose Industries
We reserve the right to correct errors and change prices (based on changes in MSRP or manufacturer pricing policies) without prior notice.
This catalog has no sub-catalogs. |
CI-105R Operating Ground Throw - .135in Travel Rigid : N Scale : AvailableStrong, self-lubricating black Delrin ground throws with external cam for strength and maximum throw. Molded on pin for direct mounting. All 100 series (Rigid) stands require modelers to fabricate a spring connecting link between the stand and the turnout. All 200 series units (Sprung) have internal springs so they can be connected directly to the turnout throwbar. Measurements indicate the maximum amount of side-to-side travel when the lever is thrown.
|
CI-206S Operating Ground Throw - .135in Travel Spring : N Scale : Available
|
CI-218S Operating Ground Throw .165in with 5 end Fittings - Sprung : N Scale : Available
Has internal springs so they can be directly connected to the turnout throwbar. Operating ground throws include five different connectors: flat blade for Roco, small diameter pin for Micro-Engineering, .083" hole for Peco, 90° slender shaft for Atlas, and large pin for most other turnouts. Also includes shim plate to raise the stand to height if needed. |
CI-220S Operating Ground Throw - Sprung w/Contacts & Fittings : N Scale : Available
Complete ground throw includes set of five fittings for use with Roco, Micro Engineering, Peco, Atlas and most other commerical turnouts. Also includes parts to assemble one low current SPDT contact set. |
CI-222S Operating Ground Throw - For Atlas C55 w/Connectors : N Scale : Available
|
CI-224S Operating Ground Throw - For Atlas C55 w/Connectors & Contacts : N Scale : Available
|
CI-5218S Operating Ground Throw .165in with 5 end Fittings - Sprung (5pk) : N Scale : Available
Has internal springs so they can be directly connected to the turnout throwbar. Operating ground throws include five different connectors: flat blade for Roco, small diameter pin for Micro-Engineering, .083" hole for Peco, 90° slender shaft for Atlas, and large pin for most other turnouts. Also includes shim plate to raise the stand to height if needed. |