You are here: Digitrax : DTX-Universal Panels - IR - Radio Receivers

We reserve the right to correct errors and change prices (based on changes in MSRP or manufacturer pricing policies) without prior notice.

This catalog has no sub-catalogs.

DTX-LNRPXtra LocoNet Repeater Module Xtra :  : 

DTX-LNRPXtra LocoNet Repeater Module Xtra
Features:
  1. Isolates segments of your LocoNet layout
  2. Protects segments of your LocoNet layouts
  3. Extends large LocoNet installations of more than 20 devices.
  4. Acts as a Diagniostic tool if LocoNet network problems occur.
  5. FCC Part 15, Class B RFI compliant.
  6. If a wiring or signal problems occur on any “standard” LocoNet section that the LNRP is connecting and monitoring, the LNRP will act to internally disconnect the faulty “standard” LocoNet segment so that the “protected” LocoNet can continue operating. If the fault is removed, the LNRP will typically automatically reconnect and resume operations on the “standard” LocoNet segment.
  • Retail Price: $72.00 
  • Current Price: $57.60 
  • Qty:

DTX-LNWI LocoNet WiFi Interface : All Scales : Announced Aug 3rd 2017

DTX-LNWI LocoNet WiFi Interface
The LNWI allows you to connect compatible WiFi devices to LocoNet and run trains using compatible throttle apps.
Wi-Fi interface to a Digitrax LocoNet for up to four compatible mobile Wi-Fi devices and Apps.
Compatible with most Android and Apple devices running supported throttle apps Easy Setup and Configuration.
A single LNWI works ‘out of the box’, with no additional configuration required. Provides up to 32 LocoNet Throttle functionality per LNWI, with compatible apps and Command Station.
Up to 8 LNWI can be supported per LocoNet Multiple LNWI units automatically resolve SSID with no additional configuration Optional Wi-Fi WPA2 security for layout operations in public.
Option switches to fully customize all device settings LocoNet Compatible
  • Retail Price: $79.00 
  • Current Price: $63.20 
  • Qty:

DTX-MS100 RS232 PC LocoNet Interface :  : 

DTX-MS100 RS232 PC LocoNet Interface

RS232 PC LOCONET INTERFACE

The MS100 Computer Interface is designed to let a computer with an IBM compatible COM, or RS232 communications port, monitor Digitrax LocoNet. Application software running in the computer can then interpret the activity on the LocoNet and report back to the user via the computer screen. The MS100 is a signal level translator between LocoNet and a 25 pin DB25 style RS232 port.

  • Retail Price: $45.00 
  • Current Price: $35.99 
  • Qty:

DTX-RX4 4 Zone Transponder :  : 

DTX-RX4 4 Zone Transponder

4 ZoneTransponding Receiver Add-on for BDL16 series occupancy detectors.

Use up to two RX4s with a BDL168 to add transponding to any 8 detection sections on your layout.

Use one RX4 with a BDL162 or BDL16 to add transponding to any 4 detection sections on your layout. (Note: BDL16 & BDL162 are discontinued).

  • Retail Price: $49.95 
  • Current Price: $39.96 
  • Qty:

DTX-UP5 LocoNet Universal Panel :  : 

DTX-UP5 LocoNet Universal Panel
  1. Give your layout a professionally finished look.
  2. Two RJ12 6 pin LocoNet jacks in the back of the panel for hooking up LocoNet devices that use RailSync.
  3. Two RJ12 6 pin Throttle jacks in the front of the panel for hooking up throttles and other LocoNet devices that do not use RailSync.
  4. One additional RJ12 6 pin Throttle jack on the side of the panel for hooking up LocoNet devices that do not use RailSync. For example, any device that is not connected to other LocoNet devices beyond itself. This extra throttle jack is great for connecting a DS54 or other local device.
  5. Indicator LED that shows the power state of a local track section.
  6. 2mm power jack that allows you to make the UP5 a battery saver terminal for your throttles by plugging in a PS14 DC power supply.
  7. Rear panel has two RJ12 jacks & two #6-32 right angle screw terminals for local track connections for power and diagnostics.

Use 6 conductor telephone cable with RJ12 6 pin male connectors on each end and it's easy to daisy chain your network around the layout without worrying about hooking up a lot of wires. You can use your UP5 with other Digitrax Universal Interconnect products such as the UP1, UP2, UP3 and also with TelCo RJ12 6 pin type jacks. Click Here for UP5 Instructions. Click here for Super Empire Builder, see section 4.13 for more information about wiring LocoNet and using UP5s.

  • Retail Price: $16.95 
  • Current Price: $13.56 
  • Qty:

DTX-UP6Z LocoNet Universal Panel and 3 Amp Z Scale Voltage Reducer :  : 

DTX-UP6Z LocoNet Universal Panel and 3 Amp Z Scale Voltage Reducer

LocoNet Universal Panel and 3 Amp Z Scale Voltage Reducer

  1. 6 LocoNet Jacks for use with all scales
  2. Reduces track voltage by 4 or 6 volts at 3 amps for safer Z Scale locomotive operation with Digitrax equipment
  • Retail Price: $29.00 
  • Current Price: $23.20 
  • Qty:

DTX-UR90 Infrared Receiver :  : 

DTX-UR90 Infrared Receiver
The UR90 is the IR receiver unit. The UR90 also looks similar to a UP5 and is mounted in the fascia of the layout. The UR90 is simply an addition to your existing LocoNet so no additional wiring is needed. The UR90 will support approximately 10 Infra-Ready throttles (DT100, DT300 and DT400 series). Most layouts will need more than one UR90 because IR is line of sight and the receivers must be able to "see" the IR signal. UR90 & UR91 can be used together on your layout to provide both wireless methods at the same time. If you already have DT300's or DT400’s the UR90 is the only thing you have to add to get infra red throttle operation.
  • Retail Price: $45.95 
  • Current Price: $36.76 
  • Qty:

DTX-UR92 Duplex Radio Transceiver/IR Receiver :  : 

DTX-UR92 Duplex Radio Transceiver/IR Receiver

UR92 Duplex Radio Transceiver

  1. Simplex Infrared Receiver For Digitrax Infra-Ready Throttles
  2. Duplex Radio (UR92), Simplex Radio (UR91) and/or InfraRed (UR90) Wireless Can Be Used Simultaneously On Any LocoNet Layout
  3. Range Is Approximately A 300 ft Diameter Circle
  4. Supports Up To 20 Digitrax Duplex Throttles At The Same Time
  5. Group Name Feature Allows Multiple Clubs To Run Independently In Close Proximity At Train Shows and Exhibitions
  6. Includes PS14 Power Supply
  7. Operates In The 2.4 GHz Band
  8. Only One UR92 Is Needed To Run Duplex On Most Layouts
  • Retail Price: $160.00 
  • Current Price: $127.99 
  • Qty:

DTX-UR92CE Duplex Radio Transceiver/IR Receiver - Europe :  : 

  1. Simplex Infrared Receiver For Digitrax Infra-Ready Throttles
  2. Duplex Radio (UR92), Simplex Radio (UR91) and/or InfraRed (UR90) Wireless Can Be Used Simultaneously On Any LocoNet Layout
  3. For use with "DCE" Throttles
  4. Range Is Approximately A 300 ft Diameter Circle
  5. Supports Up To 20 Digitrax Duplex Throttles At The Same Time
  6. Group Name Feature Allows Multiple Clubs To Run Independently In Close Proximity At Train Shows and Exhibitions
  7. Operates In The 2.4 GHz Band
  8. Only One UR92 Is Needed To Run Duplex On Most Layouts
  9. For use with "DCE" Throttles
  • Retail Price: $165.00 
  • Current Price: $131.99 
  • Qty: