You are here: Digitrax : DTX-Power Managers - Power Supplies - Throttles

We reserve the right to correct errors and change prices (based on changes in MSRP or manufacturer pricing policies) without prior notice.

This catalog has no sub-catalogs.

DTX-AR1 Single Auto Reverser :  : 

DTX-AR1 Single Auto Reverser

AR1 - SINGLE AUTO REVERSER

The easiest way to add automatic reversing to a section of your layout:

  1. 8 amp auto-reversing control for a single reversing district
  2. Simple to wire
  3. Tunable trip current lets you use it on any layout from Z to G
  4. AR1 operates with or without LocoNet so, it can be used on non-Digitrax DCC systems, too.
  • Retail Price: $29.99 
  • Current Price: $23.99 
  • Qty:

DTX-DB150 Command Station & Booster :  : 

DTX-DB150 Command Station & Booster

DB150 is shipped as part of the Super Empire Builder Sets. DB150 is also available separately

DB150 5 Amp AutoReversing DCC Command Station/Booster makes your layout more fun to run more trains, manage short circuit shutdowns and add automatic reversing. Used as part of a Super Empire Builder Xtra starter set or seperatly it gives you the capability to run upto 22 locos and 22 throttles. Great for upgrading your basic LocoNet system.

  • Retail Price: $179.99 
  • Current Price: $143.99 
  • Qty:

DTX-DB200-Plus 8amp Booster w/Auto Reversing :  : 

DTX-DB200-Plus 8amp Booster w/Auto Reversing

 DB200+ 8 AMP BOOSTER

More power to you! This 8 Amp booster is great for layouts that run lots of locos and for large-scale layouts where power requirements are heavy. This is a booster only and does not have command station capabilities.

  • Retail Price: $199.99 
  • Current Price: $159.99 
  • Qty:

DTX-DCS100 Super Chief Command Station/Booster 5amp :  : 

DTX-DCS100 Super Chief Command Station/Booster 5amp
  • Retail Price: $285.00 
  • Current Price: $227.99 
  • Qty:

DTX-DCS240 LocoNet Advanced Command Station :  : 

DTX-DCS240 LocoNet Advanced Command Station

The DCS240 Advanced Command Station lets your LocoNet® System run up to 400 locos and 400 throttles. Full read/write programming, route capability, USB connectivity, and separate programming output lets you run and program at the same time.  

  • 5 or 8 Amps of Power

  • 400 Loco Addresses

  • 400 Throttle Support

  • Combination Advanced LocoNet® Command Station and 8 amp CTC booster

  • User selectable N,HO, and large scale operation with Voltage Trim

  • LocoNet for easy plug ‘n play installation and system expansion

  • Auto resetting over temperature and short circuit protection

  • Hardware EZ routes and Loco Reset

  • Integrated USB for Computer Support

  • Over-Voltage Protected

  • Auto shutdown when command control signal is lost to prevent “runaway” trains

 

Note: Accepts DC POWER input ONLY from power supply (sold separately). Recommended power supply: Digitrax PS514 or equivalent. MAXIMUM INPUT 8 AMPS, 24VDC, 192 VA MAXIMUM CONTINUOUS, DO NOT Exceed 25VDC maximum Input. Minimum Input 13VDC.

Technical Note About DCC Booster Output Ratings: Digitrax boosters have maximum output current limits of either 5 or 8 amps. The actual continuous output current that your booster will provide to the layout depends on several factors including the input supply voltage, the ambient room temperature and air flow over the booster's heat sink. Higher input voltages increase the amount of heat that must be dissipated by the booster's heat sink. If the heat sink does not get enough air flow to allow for heat dissipation, the booster will eventually reach an over temperature state and shut down. A small fan blowing across the heat sink on your booster will increase the maximum sustained current output capacity of your booster.

Each DCC company specifies the output capacity of its boosters according to their own internal standards. Tests designed and performed by several model railroaders have shown wide variations in the actual output capacity of DCC boosters. In most cases the tests were designed to overload boosters and cause them to shut down. The conclusion based on these tests is that each manufacturer uses a different way of determining booster output capacity, Digitrax tends to be more conservative in stating booster output ratings. The factor that is most important for achieving maximum output capacity is the booster’s heat sinking ability. In these tests, Digitrax boosters have demonstrated excellent heat sinking capabilities and the ability to consistently output the advertised 5 or 8 amps when appropriate fans are added in high temperature situations.


 
  • Retail Price: $375.00 
  • Current Price: $299.99 
  • Qty:

DTX-DT402 Super Throttle with Infrared Capability :  : 

FULL FEATURE SUPER THROTTLE

Click picture to see large view
  1. Works with ANY LocoNet compatible system
  2. Full numeric keypad makes loco selection simple
  3. Run locomotives with “encoder click” knobs for speed and direction control
  4. Control light and sound effects functions with the press of a button
  5. Large LCD display shows locomotive status at a glance
  6. Built in flashlight for convenience

Full Featured With Support For:

  1. Infrared operation with UR90
  2. 29 Functions (F0-F28)
  3. Convenient step-by-step throttle option set up
  4. Simplified 4 or 2 digit addressing
  5. Over 9,000 locomotive decoder addresses
  6. 999 turnout decoder addresses
  7. 29 Functions (F0-F28)
  8. Playable whistle feature on F2
  9. Decoder programming
  10. Transponding “Find” feature
  11. Fast clock display
  12. Recall feature
  • Retail Price: $185.00 
  • Current Price: $147.99 
  • Qty:

DTX-DT402D Duplex Radio Equipped Super Throttle :  : 

FULL FEATURE DUPLEX EQUIPPED SUPER THROTTLE *New Firmware Update (Look Below For More Information)

Click picture to see large view
  1. Works with ANY LocoNet compatible system
  2. Full numeric keypad makes loco selection simple
  3. Run locomotives with “encoder click” knobs for speed and direction control
  4. Control light and sound effects functions with the press of a button
  5. Large LCD display shows locomotive status at a glance
  6. Built in flashlight for convenience

Full Featured With Support For:

  1. Duplex Radio operation with UR92
  2. 29 Functions (F0-F28)
  3. Convenient step-by-step throttle option set up
  4. Simplified 4 or 2 digit addressing
  5. Over 9,000 locomotive decoder addresses
  6. 999 turnout decoder addresses
  7. 29 Functions (F0-F28)
  8. Playable whistle feature on F2
  9. Decoder programming
  10. Transponding “Find” feature
  11. Fast clock display
  12. Recall feature
Having the new DT402D means you'll be doing things differently from now on...
  1. You’ll select and run your locomotives without plugging in
  2. You'll dispatch locomotives and consists without plugging in
  3. You'll do operations mode programming without plugging in
  4. You'll have plenty of range to move around
  5. You'll be able to continue to use existing equipment along with duplex radio
  6. You'll have a full duplex link to control your layout and receive feedback, too.

Now available for download at digitrax.com in the "What's New" section. Follow the instructions posted on their website to update your throttles to the latest firmware. Note that once you have performed the update, you should unplug the throttle from LocoNet and then remove and re-insert the battery to re-initialize the unit.

This update improves the DT402D login sequences and overall performance on large installations using multiple UR92s and DT402Ds. This is an optional update for end users and those customers currently using DT402D & UR92 who are not experiencing performance issues are not required to update their throttles. DT402Ds with any version of firmware will work together.

All shipments of DT402D sent after August 5, 2011 include this new firmware and do not need to be updated.

  • Retail Price: $250.00 
  • Current Price: $199.99 
  • Qty:

DTX-DT402DCE Duplex Radio Equipped Super Throttle (for Europe) :  : 

  • Retail Price: $250.00 
  • Current Price: $199.99 
  • Qty:

DTX-DT402R Simplex Radio Equipped Super Throttle :  : 

DT402R - FULL FEATURE RADIO EQUIPPED SUPER THROTTLE

Click picture to see large view
  1. Works with ANY LocoNet compatible system
  2. Full numeric keypad makes loco selection simple
  3. Run locomotives with “encoder click” knobs for speed and direction control
  4. Control light and sound effects functions with the press of a button
  5. Large LCD display shows locomotive status at a glance
  6. Built in flashlight for convenience
  1. Simplex Radio operation with UR91
  2. 29 Functions (F0-F28)
  3. Convenient step-by-step throttle option set up
  4. Simplified 4 or 2 digit addressing
  5. Over 9,000 locomotive decoder addresses
  6. 999 turnout decoder addresses
  1. 29 Functions (F0-F28)
  2. Playable whistle feature on F2
  3. Decoder programming
  4. Transponding “Find” feature
  5. Fast clock display
  6. Recall feature
  • Retail Price: $235.00 
  • Current Price: $187.99 
  • Qty:

DTX-PM42 Power Manager 4 Sub-Districts with Auto Reversing :  : 

DTX-PM42 Power Manager 4 Sub-Districts with Auto Reversing

POWER MANAGER 4 SUB-DIST W/AUTO REVERSE

PM42 Quad Power Manager lets you use a single booster and divide its output into 4 power sub-districts for automatic reversing &/or to improve operation by preempting booster shutdown when a short circuit is detected by the PM42. If you want to improve operation but don't need the added power (or expense) of adding a booster, the PM42 is the right answer for you. Each PM42 can run 4 sub-districts off a single booster in any combination of regular sub-districts and auto reversing sub-districts.

  • Retail Price: $79.95 
  • Current Price: $63.96 
  • Qty:

DTX-PM42-UpgradeUpgrade for PM4 to PM42 :  : 

DTX-PM42-UpgradeUpgrade for PM4 to PM42

Current PM4 users can upgrade their units for the new features of the PM42 by changing the chip on the board and re-programming the PM42 for their operation. The PM42 gives you 2 additional faster short circuit detection sensitivity settings.

If your existing PM4s are doing what you need them to do, there is no need to upgrade them.

  • Retail Price: $9.99 
  • Current Price: $8.99 
  • Qty:

DTX-PS14 AC to DC Adapter 14V DC :  : 

Power Supply - The PS14 is a 300ma, 14 Volt power supply for powering Digitrax accessories like the UP5, BDL168, DS64, SE8C, LNRP, UR90 & UR91 and others
  1. Universal AC input 95-240V 50/60Hz
    US 2 prong plug, in sideways orientation to fit nicely on a plug strip
  2. Stabilized output
  3. Weight is only 2 ounces
  4. Approximately a 4 foot long cable
  5. Right angle, 2.1 mm center positive connector
  6. Red LED "power on" indicator
  • Retail Price: $12.95 
  • Current Price: $10.36 
  • Qty: